|
ADSL Compliance Compliant with ADSL Standard
- Full-rate ANSI T1.413 Issue 2
- G.dmt (ITU G.992.1)
- G.lite (ITU G.992.2)
- G.hs (ITU G.994.1)
- ADSL over ISDN/U-R2 Compliant with ADSL2 Standard
- G.dmt.bis (ITU G.992.3)
- ADSL2 Annex M (ITU G.992.3 Annex M) (Available on BiPAC 7402X series -A) Compliant with ADSL2+ Standard
- G.dmt.bisplus (ITU G.992.5)
- ADSL2+ Annex M (ITU G.992.5 Annex M)
(Available for BiPAC 7402(G)X A model only)
Network Protocols and Features NAT, static routing and RIP-1/2 Universal Plug-and-Play (UPnP) Compliant Dynamic Domain Name System (DDNS) Virtual Server and DMZ SNTP, DNS relay, IGMP Proxy POP3 (email account checking) IGMP Snooping for video services
Management Quick Installation Wizard and Auto ADSL settings Web-based GUI for remote and local management Firmware upgrade and configuration data upload and download via web-based GUI Embedded Telnet server for remote and local management Available Syslog monitoring SNMP v3, MIB-I and MIB-II support Supports DHCP server/client/relay Support Remote Management TR-069 *
Wireless 802.11g Compliant with IEEE 802.11g and 802.11b standards 2.4GHz - 2.484GHz frequency range Up to 54Mbps wireless operation rate 64-/128-bit WEP supported for encryption Wireless Security with WPA-PSK/WPA2-PSK support Wireless Distribution System (WDS) repeater function support Wi-Fi Protected Setup
IPTV Application *(Note 4) IGMP Snooping Virtual LAN (VLAN) Quality of Service (QoS)
ATM and PPP Protocols ATM Adaptation Layer Type 5 (AAL5) Multiple protocols over AAL5 (RFC 2684, formerly RFC 1483) Bridged or routed Ethernet encapsulation VC and LLC based multiplexing PPP over Ethernet (PPPoE) PPP over ATM (RFC 2364) Classical IP over ATM (RFC 1577) MAC Encapsulated Routing (RFC 1483 MER) OAM F4/F5
Operating Environment Operating temperature: 0 - 40°C Storage temperature: -20 - 70°C Humidity: 20 - 95% non-condensing
Quality of Service Control Supports DiffServ approach Traffic prioritization and bandwidth management based-on IP protocol, port number and
address
Firewall Built-in NAT firewall Stateful Packet Inspection (SPI) Prevent DoS attacks including IP Spoofing, Land Attack,Smurf Attack, Ping of Death, TCP SYN Flooding, etc. Packet Filtering port, source IP address, destination IP address, MAC address URL Content Filtering string or domain name detection in URL string
Hardware Specifications
Physical Interface
WLAN: one 2 dBi detachable antenna
DSL: ADSL port
Ethernet: 4-port 10/100M auto-crossover (MDI/MDI-X) Switch
USB 2.0 supports 3G/HSDPA modem backup
Console: the Ethernet Port # 4 can be also connected to console
WPS push button
Factory default reset button
Power jack
Power switch
Physical Specifications
Dimensions: 7.28" x 4.86" x 1.42" (185mm x 123.5mm x 36mm)
Power Requirements
Input:12V DC, 1.2A
Car power cable available separately *(Note 6)
Models & Standards Supported
Product Models
BiPAC 7402X 3G/ADSL2+ VPN Firewall Router
BiPAC 7402GX 3G/ADSL2+ Wireless VPN Firewall Router
BiPAC 7402GXL 3G/ADSL2+ Wireless Firewall Router Standards
BiPAC 7402X series -A: Annex A & Annex M
BiPAC 7402X series -U: Annex B & U-R2
Annex A and Annex M: ADSL over POTS
Annex B and Annex U-R2: ADSL over ISDN
*Notes: 1. On request for Telco/ISP projects 2. The router may require firmware modification for certain ADSL2/2+/ Annex M DSLAMs. 3. The 3G/HSDPA data rate is dependent on your local service provider and your
3G/HSDPA modem. 4. IPTV applications may require subscribing to IPTV services from a Telco/ISP. 5. Specifications in this datasheet are subject to change without prior notice. 6. The car power cable can be made available as an optional accessory upon request. |